工程热力学5000字论文

工程热力学5000字论文

同志你好:
以下是我总结的材料,请核对后使用
祝愿你工作愉快

工程热力学

热力学是研究热现象中，物质系统在平衡时的性质和建立能量的平衡关系，以及状态发生变化时，系统与外界相互作用的学科。
工程热力学是热力学最先发展的一个分支，它主要研究热能与机械能和其他能量之间相互转换的规律及其应用，是机械工程的重要基础学科之一。
工程热力学的基本任务是：通过对热力系统、热力平衡、热力状态、热力过程、热力循环和工质的分析研究，改进和完善热力发动机、制冷机和热泵的工作循环，提高热能利用率和热功转换效率。
为此，必须以热力学基本定律为依据，探讨各种热力过程的特性；研究气体和液体的热物理性质，以及蒸发和凝结等相变规律；研究溶液特性也是分析某些类型制冷机所必需的。现代工程热力学还包括诸如燃烧等化学反应过程，溶解吸收或解吸等物理化学过程，这就又涉及化学热力学方面的基本知识。
工程热力学是关于热现象的宏观理论，研究的方法是宏观的，它以归纳无数事实所得到的热力学第一定律、热力学第二定律和热力学第三定律作为推理的基础，通过物质的压力 、温度、比容等宏观参数和受热、冷却、膨胀、收缩等整体行为，对宏观现象和热力过程进行研究。
这种方法，把与物质内部结构有关的具体性质，当作宏观真实存在的物性数据予以肯定，不需要对物质的微观结构作任何假设，所以分析推理的结果具有高度的可靠性，而且条理清楚。这是它的独特优点。
古代人类早就学会了取火和用火，不过后来才注意探究热、冷现象的实质。但直到17世纪末，人们还不能正确区分温度和热量这两个基本概念的本质。在当时流行的“热质说”统治下，人们误认为物体的温度高是由于储存的“热质”数量多。1709～1714年华氏温标和1742～1745年摄氏温标的建立，才使测温有了公认的标准。随后又发展了量热技术，为科学地观测热现象提供了测试手段，使热学走上了近代实验科学的道路。
1798年，朗福德观察到用钻头钻炮筒时，消耗机械功的结果使钻头和筒身都升温。1799年，英国人戴维用两块冰相互摩擦致使表面融化，这显然无法由“热质说”得到解释。1842年，迈尔提出了能量守恒理论，认定热是能的一种形式，可与机械能互相转化，并且从空气的定压比热容与定容比热容之差计算出热功当量。
英国物理学家焦耳于1840年建立电热当量的概念，1842年以后用不同方式实测了热功当量。1850年，焦耳的实验结果已使科学界彻底抛弃了“热质说”。公认能量守恒、能的形式可以互换的热力学第一定律为客观的自然规律。能量单位焦耳就是以他的名字命名的。
热力学的形成与当时的生产实践迫切要求寻找合理的大型、高效热机有关。1824年，法国人卡诺提出著名的卡诺定理，指明工作在给定温度范围的热机所能达到的效率极限，这实质上已经建立起热力学第二定律。但受“热质说”的影响，他的证明方法还有错误。1848年，英国工程师开尔文根据卡诺定理制定了热力学温标。1850年和1851年，德国的克劳修斯和开尔文先后提出了热力学第二定律，并在此基础上重新证明了卡诺定理。
1850～1854年，克劳修斯根据卡诺定理提出并发展了熵的概念。热力学第一定律和第二定律的确认，对于两类“永动机”的不可能实现作出了科学的最后结论，正式形成了热现象的宏观理论热力学。同时也形成了“工程热力学”这门技术科学，它成为研究热机工作原理的理论基础，使内燃机、汽轮机、燃气轮机和喷气推进机等相继取得迅速进展。
与此同时，在应用热力学理论研究物质性质的过程中，还发展了热力学的数学理论，找到了反映物质各种性质的相应的热力学函数，研究了物质在相变、化学反应和溶液特性方面所遵循的各种规律 。1906年，德国的能斯脱在观察低温现象和化学反应中发现热定理；1912年，这个定理被修改成热力学第三定律的表述形式。
二十世纪初以来，对超高压、超高温水蒸汽等物性，和极低温度的研究不断获得新成果。随着对能源问题的重视，人们对与节能有关的复合循环、新型的复合工质的研究发生了很大兴趣。

急求关于工程热力学和流体力学的论文2000字各一篇原创不要太高深，邮箱是493804580@!!!!!!!!!!!!!!!

自己写去。

求一篇论文 用工程热力学论述第二类永动机！！3000字以上！！

没分搞什么 太贪心了吧也

求热能动力工程的英文论文一篇，中英文都要，英文单词5000左右，谢谢。

近二十年来，以振动为主要原因造成的恶性事故相继发生，给国家造成了巨大经济损失。而且，振动问题目前仍是新投运大机组不能按期并网、正常投运的主要原因，在机组正常运行期间，振动问题连续不断，影响到正常生产，经常出现机组减负荷和带病运行的情况，甚至使机组被迫停机处理，这些事故屡见不鲜。本系统基于LabVIEW虚拟仪器软件平台，对汽轮机振动信号进行读取加窗，并进行谱分析及自相关分析。LabVIEW虚拟仪器就是在以通用计算机为核心的硬件平台上，由用户设计定义、具有虚拟前面板、测试功能由测试软件实现的一种计算机仪器系统。本系统主要完成了对汽轮机振动信号进行读取，对信号进行矩形窗、汉宁窗、海明窗的加窗选择，然后分别进行信号的幅值谱、功率谱、相位谱分析及自相关分析，并且具有图形操作及显示界面。系统运行结果证明，本系统能够完成对信号的读取，并进行三种窗函数及各种分析的动态选择，并用图形显示结果。
Over the last 20 years, mainly due to the vibration caused by the fatal accidents occurred one after another, inflicting huge economic losses. Furthermore, the vibration is still new to large units shipped impossible grid, the normal operation for the main the crew during normal operations, continuous vibration problems affecting the normal production, Units often reduced load and operation of the sick, and even the unit was forced to stand, these incidents not uncommon. The system based on LabVIEW virtual instrument software platform for turbine vibration signal window read, and spectral analysis and correlation analysis. LabVIEW virtual instrument is a common core of computer hardware platform, defined by the user, with virtual front panel, the test function test software from a computer equipment system. The system completed the turbine vibration signal read, the signal rectangular window Hanning, Hamming window window choice, and then the signal amplitude spectrum, power spectrum and phase spectrum analysis and correlation analysis, and operating with graphics and display interface. The result of running the system proved that the system can accomplish the signal read, and three window function and the dynamic analysis of the various options and graphical display with the results.

专业前景 本专业以工程热物理学科为主要理论基础，以内燃机和正在发展中的其它新型动力机械及系统为研究对象，运用工程力学、机械工程学、自动控制、计算机、环境科学、微电子技术等学科的知识和内容，研究如何把燃料的化学能和液体的动能安全、高效、低（或无）污染地转换成动力的基本规律和过程，研究转换过程中的系统和设备的自动控制技术。随着常规能源的日渐短缺，人类环境保护意识的不断增强，节能、高效、降低或消除污染排放物、发展新能源及其它可再生能源成为本学科的重要任务，在能源、交通运输、汽车、船舶、电力、航空宇航工程、农业工程和环境科学等诸多领域获得越来越广泛的应用，在国民经济各部门发挥着越来越重要的作用。 培养目标 本专业方向培养具备热能与动力工程专业方面的基本理论、基本知识和基本技能，能在国民经济各部门从事热力发动机和其它新型动力机械及设备的设计、制造、管理、教学和科研等方面的高级工程技术人才。 培养特色 本专业在加强学生基础理论和综合素质教育的同时，加强计算机及自动控制技术的应用，强化专业实践教学，注重全能训练，全面提高学生的实践动手能力和科学研究潜力，使毕业生具有较强的择业竞争能力和较宽的就业适应能力。 主干课程 机械制图、机械原理、机械设计、理论力学、材料力学、工程材料、电工技术、电子技术、计算机软件基础、液压技术、液力传动、内燃机构造、内燃机原理、内燃机设计、内燃机试验、发动机电子技术、工程热力学、流体力学、传热学、自动控制理论、现代测试技术等。 就业方向 毕业后可从事能源与动力设备的行政管理、内燃机及新型动力设备的开发研制、内燃机排放控制、新能源利用、汽车工业、兵器工业、环保工业、交通运输业、船舶、电力、航空宇航工业等方面的工作。
The prospect of major works of the major hot in physics as the main theoretical basis to the internal combustion engine and the other is the development of new machinery and power systems for the study, the use of engineering mechanics, mechanical engineering, automation, computers, environmental science, microelectronics technology disciplines, such as content knowledge and to study how the chemical energy of fuel and liquid kinetic energy security, high-performance, low (or none) of pollution to the power into the basic law and the process of research in the conversion process of the automatic control systems and equipment technology . With the growing shortage of conventional energy, human the growing awareness of environmental protection, energy saving, high efficiency, reduce or eliminate polluting emissions, the development of new energy and other renewable sources of energy has become an important task for the subjects in the energy, transportation, automotive, ships, electricity, aviation aerospace engineering, agricultural engineering and environmental science in many fields such as access to more and more widely used, the department in the national economy is playing an increasingly important role. Cultivate cultivate goal with the direction of the major thermal power projects with the major aspects of the basic theory, basic knowledge and basic skills, to engage in various departments in the national economy and other heat engines power the new machinery and equipment design, manufacture, management, teaching and scientific research aspects of advanced engineering and technical personnel. Cultivate major characteristics of the students in strengthening the basic theory and the overall quality of education, to strengthen the computer and automatic control technology, and strengthen the teaching of professional practice, pay attention to all the training, students enhance the practice of comprehensive practical ability and scientific research potential, so that graduates have strong competitiveness and a wide choice of employment adaptability. Mechanical Drawing trunk curriculum, mechanical principles, mechanical design, theoretical mechanics, mechanics of materials, engineering materials, electrical technology, electronics technology, computer software foundation, hydraulic technology, hydraulic transmission, the internal combustion engine structure, the principle of internal combustion engines, internal combustion engine design, the internal combustion engine testing, engine electronic technology, engineering thermodynamics, fluid mechanics, heat transfer, automatic control theory, modern test technology. Employment after graduation can be engaged in the direction of energy and power equipment, administration, internal combustion engines and new development of power equipment, internal combustion engine emission control, new energy use, the auto industry, the weapons industry, industrial environmental protection, transport, shipping, electricity, air space industrial job.

Motor vehicles are not the only air polluters. Coal and oil, used to heat homes and factories and to generate electricity, contain small amounts of sulfur. When the fuels are burned, sulfur dioxide, a poisonous gas, is produced. It is irritating to the lungs. Some cities have passed laws that allow coal and oil to be burned only if their sulfur content is low.
汽车不是唯一的空气污染。煤炭和石油，用于家庭取暖和工厂，并产生电力，含有少量的硫。当燃料燃烧，二氧化硫，一种有毒气体，就产生了。它是刺激到肺部。一些城市已通过法律，允许煤炭和石油只有在其被烧毁硫含量低。
Most electricity is generated by steam turbines. About half of the sulfur dioxide in the air comes from burning fuel to make steam. Nuclear power plants do not burn fuel, so there is no air pollution of the ordinary kind. But the radioactive materials in these plants could present a danger in an accident. Also, there is a problem in disposing of the radioactive wastes in a way that will not endanger the environment.
大部分电力是由蒸汽涡轮机。关于空气中的二氧化硫，使蒸汽一半来自燃料燃烧。核电厂不烧燃料，所以不存在的那种普通的空气污染。但是，在这些植物的放射性物质可能会提出一个意外的危险。此外，还有一个在放射性废物处置的方式，不会危害环境的问题。
Another type of pollution, called thermal (heat) pollution, is caused by both the fuel-burning and nuclear plants. Both need huge amounts of cold water, which is warmed as it cools the steam. When it is returned to the river, the warm water may stimulate the growth of weeds. It may also kill fish and their eggs, or interfere with their growth.
另一种污染类型，称为热（热）污染，是造成双方的燃料燃烧和核电厂。双方都需要的冷水，这是温暖，因为它大量的蒸汽冷却。当返回到河边，温暖的水会刺激杂草生长。它也可以杀死鱼，它们的卵，或干扰他们的成长。
Physicists are studying new ways of generating electricity that may be less damaging to the environment. In the meantime, many power plants are being modernized to give off less polluting material. Also, engineers try to design and locate new power plants to do minimum damage to the environment.
物理学家们正在研究发电对环境损害较小的新方法。与此同时，许多发电厂也在实现现代化以减少污染物质。此外，工程师们尝试设计并找到对环境的损害最小的新的发电厂。

Thermal energy and power engineering
This program is to cultivate both master thermal energy and power engineering professional basic theoretical knowledge, computing skills, but also the ability in various forms of generating power plant, refrigeration and air conditioning, new energy related fields in need of economic management knowledge and ability, can be engaged in the electric power industry related to areas of science and technology application, research, development and management of a senior talents. According to the national construction and talents needs, set up the professional direction includes: thermal power engineering, power plant set control operation, refrigeration and air conditioning engineering, gas power engineering, advanced energy engineering etc.
Major courses: theoretical mechanics, mechanics of materials, engineering thermodynamics, engineering fluid mechanics, heat transfer, turbine principle, boiler principle, thermal power plants, the pump and fan, automatic control theory, motor learning, circuit theory, the control system, unit unit operation principle, thermal process detection technology, engineering graphics, mechanical design basis, electrician technical basis, electronic technology base, refrigeration and cryogenic principle, refrigeration compressor, refrigeration automation and testing technology, gas turbine principle, gas gas-steam combined cycle power plant, gas turbine combined-cyde operation and maintenance, nuclear reactor theoretical basis, nuclear system and the maintenance, the PWR nuclear power plant system and equipment, wind power generation principle, professional class.
Employment place to go: large-scale modernized electric power enterprise, power equipment manufacturing enterprises and energy class enterprise engaged in production, operation and management work, Government departments at all levels and institution engaged in energy, power, energy saving, environmental planning, design, construction, operation, consultation and supervision work; etc. Research institutes, universities in energy and power related research and development, teaching, management, etc.