论文摘要翻译成中文

论文摘要翻译成中文

是的，论文英文摘要就是中文摘要的翻译，一篇论文的英文摘要要与中文摘要保持一致。

英文摘要内容包含题名、摘要及关键词。为了国际交流，科学技术报告、学位论文和学术论文应附有外文（多用英文）摘要。原则上讲，中文摘要编写的注意事项都适用于英文摘要，但英语有其自己的表达方式、语言习惯，在撰写英文摘要时应特别注意。

扩展资料

论文英文摘要得到相关要求：

1、字数

题名不应过长，国外科技期刊一般对题名字数有所限制。例如，美国医学会规定题名不超过2行，每行不超过42个印刷符号和空格，美国国立癌症研究所杂志要求题名不超过14个词，英国数学会要求题名不超过12个词。

2、一致性

同一篇论文，其英文题名与中文题名内容上应一致，但不等于说词语要一一对应。在许多情况下，个别非实质性的词可以省略或变动。例如：工业湿蒸汽的直接热量计算，英文应是：The Direct Measurement of Heat Transmitted Wet Steam。

3、冠词

科技论文题名中的冠词用得较多，近些年有简化的趋势，凡可用可不用的冠词均可不用。例如：The Effect of Groundwater Quality on the Wheat Yield and Quality.其中两处的冠词the 均可不用。

参考资料来源：百度百科--摘要

论文摘要部分如何翻译成英文？

论文用到的专业性词汇比较多，很多时候在写英文的时候可能会感到困难，我用过的是这个，你看一下吧。

第一步，在首页三大板块中点击【文档翻译】。

第二步，点击【选择文件】，从电脑中选中文件（注意这篇文档里只放论文摘要部分），点击【打开】。

第三步，文件上传之后，看到翻译语种选择，设置为【简体中文】转换【英语】，点击右下角【立即翻译】。

第四步，等到翻译完成，屏幕上会跳出温馨提示，点击【查看文件】，就能找到保存在电脑上已经翻译成英文的论文摘要了。

毕业论文摘要翻译

Hot Deformation Behavior of metal an important aspect of research is to study the metal in the process of hot deformation behavior of the flow stress, as well as changes in the law of the mechanical properties of the macro-response behavior is the flow stress.
According to the theory of deformation, the flow stress of metal materials in a one-way refers to the deformation conditions sufficient to achieve plastic deformation of the stress intensity. Metals and alloys in the plastic working process, the flow stress determined the deformation of the size of equipment needed to load and the size of the required energy consumption. Generally speaking, the impact of the metal flow stress factors in general can be divided into internal factors and external factors. The main external factors, including deformation temperature, strain rate and strain (deformation), they are internal factors of the flow stress of metallic materials. Deformation temperature on the impact of flow stress as follows: flow stress with deformation temperature lower, but reduced somewhat different, that is, the higher strain rate, with the increase in deformation temperature, flow stress gradient reduced more Great. Strain rate on the impact of flow stress: the higher the strain rate, the greater the value of flow stress, and increase the flow stress with temperature changes, temperature, the higher the lower the rate of increase. The rate of increase of flow stress is not maintained at a fixed value, but as the strain rate changes. Internal factors include the chemical composition of metals, metal the microstructure changes such as dynamic recovery and dynamic recrystallization, such as work hardening. High-temperature mechanical deformation of metallic materials from high temperature creep behavior of metals on the basis of developed. Metals and alloys the existence of thermal processing thermal activation process, the strain rate thermal activation process control. Deformation under different conditions using different expressions, but also related to thermal activation, the dislocation movement, such as the micro-mechanism.
This paper AZ31 magnesium alloy sheet for the study, the RG-based microcomputer-controlled universal testing machine, metallographic microscope and scanning electron microscopy tools, research and analysis of magnesium alloy at different temperatures forming performance, flow stress and microstructure changes in the law. The following conclusions:
1. Extrusion, cross-rolling, cold-rolled, hot-rolled, as well as the level of casting AZ31 magnesium alloy sheet metal microstructure is equiaxed structure, the grain size of 5 ~ 25μm;
2. Extrusion of magnesium alloy sheet metal grain size is about 5 ~ 12.5μm, the strain rate is less than 1.0x10-2s-1, the deformation temperature is higher than 150 ℃, the extension rate of greater than 45%, and with the strain rate lower or raise the temperature of the peak flow stress also be reduced accordingly. When the temperature is 425 ℃, then the peak steady-state flow stress is almost equal to the flow stress at the time that the peak stress does not appear, and its value in between 18 ~ 20MPa, and the extension rate of 132%.
3. Cross-rolled sheet metal so that the peak flow stress decreased significantly increased plasticity. (And can reduce or eliminate the anisotropic material to improve the performance of its punch, so that elongation of the material significantly increased for deep-drawing deformation even provided a good internal organization.) At a temperature of 425 ℃, strain rate is less than 6.6x10-4s-1, the elongation δ> 225%, alloy shows superplasticity.
4. 250 ~ 425 ℃ temperature range, semi-continuous casting + annealing cold-rolled sheet before and after the stress - strain curve changes little elongation δ are greater than 65%. Cold-rolled sheet can be used directly in temperatures greater than 250 ℃ forming thermal processing.
5. At a high temperature to soften and as a result of the role of dynamic recrystallization results of horizontal continuous casting + anisotropic cold-rolled sheet has been significantly improved. At 250 ℃ when the sheet are an extension of the rate of 118 percent, the smallest anisotropy alloys.
6. At a temperature less than 220 ℃, the fracture morphology of the main axis for large and small dimples, such as composition, surface tear edge clarity, and depth of dimples smaller size; When the temperature is greater than 240 ℃ when the equiaxed the edge of dimples appear fine grains, the occurrence of a fracture. Magnesium alloy at high temperature phase of the basic fracture along fracture, with the strain rate increased, the fracture mode transformed to the ductile fracture trend. AZ31 magnesium alloy in the plastic deformation occurred during the dynamic recrystallization and grain growth.

论文摘要英文翻译怎么搞

论文通常都包括中文摘要和英文摘要这两个部分。可以用百度翻译、有道翻译这些去翻译。但毕竟不是人工翻译会有瑕疵。出现用词错误或者语法错误都是很常见的。你要翻译的中文字数越多，出错的概率越大。所以想要你的论文质量好一点的话，还是要靠人力。你可以自己研究一下语法用词，尝试自己去翻译。或者请教老师也可以。翻译达人，论文翻译，润色。论文写好了之后要反复去阅读修改，把错的地方找出来。一份耕耘一份收获，要多下点功夫。