英文论文模板图

英文论文模板图

英语论文格式模板2017

英语论文格式模板是怎样的呢?撰写一篇优秀的毕业论文，除了细心严谨之外，还要了解论文格式。下面是我分享的英语论文格式模板，欢迎阅读!

英文论文格式均以美国土木工程师协会出版社发布的标准格式为准。

英语论文用激光打印机打印，打印稿为黑白稿，彩色打印件会影响出版效果。 版心：a4纸，上、下页边距3.5 cm，左、右页边距均为3.25 mm。论文内容宽不得超过14.5cm， 长不得超过22.5cm。

字体和字号：正文，标题，作者联络信息和图表中的文字均为times new roman 12号字。可以跟据需要使用同类字体中的粗体，斜体。

行距：单倍行距。

页码：论文正文和文后所附图例都需添加页码。页码为阿拉伯数字，位于页面下方居中。

文体：文章应语法正确，技术用词准确。标题应该以最简洁的语言概括文章内容。如果标题较长，请采用title: subtitle的形式。

数学公式：文中的数学公式不得手写，必须打印。公式如果在文中多次被引用，应该编号。公式之间，公式和正文之间都应该空一行。 单位： 文中所用的度量衡单位应为国际单位。可在括号内，单位对应表中列出其他单位。有关国际单位的使用(standard practice for use of the international system of units)可以通过电话1-向asce索取。其他相关使用参考文献，如anmc metric editorial guide， 5th ed，1992 可向美国国家公制协会 索取(american national metric council， 1735n. lynn street， suite 950， arlington， va 22209-2022)

图表：

标题说明和图例：插入的图表应该以出现顺序编号(figure 1，figure 2，table 1，table 2)。图的说明和标题，包括图的序号应该位于图的下方。表的说明和标题，包括表的序号应该位于表格上方。

位置：图可以插入到正文中，或者集中放在文章最后。如果在正文中插入图，尽量放在页面的顶部或尾部。不要选择文字环绕图形的对齐方式，可选择上下环绕方式。

底纹：插图中不要选择带阴影或底纹，否则会影响印刷效果。

照片：如果文中需要附上照片，在文中出现照片的地方贴上其黑白光面冲洗照片，标题说明位于照片下方。照片将和正文一起缩印，请不要提供彩色照片，以免影响印刷效果。

扫描图：印刷后的扫描图不如原件清晰。如果文中有扫描图，请提供灰色色标扫描图。

作者联络信息：请用横线和正文隔开。联络信息可以为一位作者或所有作者的，包括以下内容：作者全名;所属学会;学历或授予的荣誉;所在单位;通讯地址和电子邮箱;电话和传真。

参考文献：所有参考文献为单倍行距，放在文章最后，按照第一作者姓氏的字母顺序排列。如有同一作者的两篇以上文献，按出版年代先后排列。正文中引用参考文献时，作者和出版年代应该放入括号内。由于上标缩印后会变小，难于辨认，正文中不使用上标标注参考文献。所列出的参考文献应当在正文中都有所引用，如果正文中没有引用，请将文献列入文章最后的附加信息(additional information)部分，或者相关材料(related materials)部分。

论文一般由题名、作者、摘要、关键词、正文、参考文献和附录等部分组成，其中部分组成(例如附录)可有可无。论文各组成的'排序为：题名、作者、摘要、关键词、英文题名、英文摘要、英文关键词、正文、参考文献、附录和致谢。

1、毕业论文格式的写作顺序是：标题、作者班级、作者姓名、指导教师姓名、中文摘要及关键词、英文摘要及英文关键词、正文、参考文献。

2、毕业论文中附表的表头应写在表的上面，居中;论文附图的图题应写在图的下面，居中。按表、图、公式在论文中出现的先后顺序分别编号。

3、毕业论文中参考文献的书写格式严格按以下顺序：序号、作者姓名、书名(或文章名)、出版社(或期刊名)、出版或发表时间。

4、论文格式的字体：各类标题(包括参考文献标题)用粗宋体;作者姓名、指导教师姓名、摘要、关键词、图表名、参考文献内容用楷体;正文、图表、页眉、页脚中的文字用宋体;英文用TimesNewRoman字体。

5、论文格式的字号：论文题目用三号字体，居中;一级标题用四号字体;二级标题、三级标题用小四号字体;页眉、页脚用小五号字体;其它用五号字体;图、表名居中。

6、格式正文打印页码，下面居中。

7、论文打印纸张规格：A4210297毫米。

8、在文件选项下的页面设置选项中，字符数/行数选使用默认字符数;页边距设为上：3厘米;下：2.5厘米;左：2.8厘米;右：2.8厘米;装订线：0.8厘米;装订线位置：左侧;页眉：1.8厘米;页脚1.8厘米。

9、在格式选项下的段落设置选项中，缩进选0厘米，间距选0磅，行距选1.5倍，特殊格式选(无)，调整右缩进选项为空，根据页面设置确定行高格线选项为空。

10、页眉用小五号字体打印XX大学XX学院20XX级XX专业学年论文字样，并左对齐。

11、使用软件：MicrosoftWord2000以上版本。

文献注释

注释不同于参考文献。参考文献是作者写作论著时所参考的文献书目，集中列于文末。而注释则是作者对正文中某一内容作进一步解释或补充说明的文字，不要列入文末的参考文献，而要作为注释放在页下，用①②标识序号。注释中提到的论著保持通常格式，如：

①与正文部分空出两行;②按照文中的索引编号分别或合并注释;③注释采用五号黑体，注释内容汉语采用小五号宋体，英语采用Times New Roman 9号。

英语议论文万能模板

英文论文摘要

英文论文摘要模板

英文论文摘要怎么写，你会写了吗?下面是我为大家收集的关于英文论文摘要模板，希望能够帮到大家!

ABSTRACT

As an important part of Chinese academic journals, sci-tech periodicalshave great significance to the spread of knowledge of science and to thedevelopment of technology. The level of internationalization of a sci-tec journalrepresents its recognition degree in the field of international publishing,besides, it is also a key criteria of the success for launching the journals. Thereare the largest number of sci-tech periodicals launched in Beijing, which leadsto a central role that taken by this area. Therefore, result from the researchwhich focus in Beijing can, to a certain extent, reflect the international level ofChinese sci-tech periodicals.

This paper is divided into six chapters: Chapter one is a brief review of theacademic theories and description about the practice status and the currentsystem of Chinese sci-tech periodicals. Also, it summarizes the stages andcharacteristics of the development of sci-tech periodicals in Beijing. In chaptertwo, it provides the historical foundation, system condition and thedevelopment of digital technology for the following analysis. Chapter three, tofive respectively elaborates the current situation of the development of sci-techperiodicals in Beijing area by 3 aspects: content innovation, business strategyand media. In chapter six, it concluded the problems that China's sci-techperiodicals are facing during the globalization and then provides possiblecountermeasures based on the analysis in previous chapters.

Key Words: Beijing; sci-tech periodicals; internationalization; impact factor

Abstract

Within the framework of feminism and archetypal criticism, this thesis, by taking ThePassion of New Eve as its discourse, analyzes and discusses Angela Carter's application ofdemythologizing as a feminist strategy. By rewriting and subverting those female archetypes,Carter aims to break the fetters and shackles of patriarchy, exploring the way to women'sliberation as well as the reconciliation between two genders.

Believing that human society has been established on patriarchy, feminists endeavor tochange women's subordinate status and achieve gender equality. Archetypal criticism, as oneof the most influential branches in literary criticism,regards myth as the origin of literature.

Myths,especially the Bible,cover all the forms and motifs known as archetypes in literature.

As a devoted pioneer and advocator of feminism, Carter realizes that those female archetypesare usually stereotyped and dogmatic, which is actually invented by patriarchy for theoppression and exploitation of women.

Based on intensive reading and exhaustive textual analysis, this thesis illustrates Carter'sdemythologizing of three female archetypes in The Passion of New Eve, which are“Temptress,,,”Mother Goddesses“ and ”Eve“ respectively. Firstly, the sufferings that Leilahencounter in the novel reveal that ”Temptresses“ are in fact victims of patriarchy instead oforigins of disloyalty and disasters. While seen by men as objects of their sexual desires, theyalso risk self-objectification, which results in the deprivation of subjectivity as independenthuman beings. Secondly, ”Mother“ in Beulah is just an artificial myth,汪 consolatory toolfabricated by patriarchy, behind the glorification of which are patriarchal values and codes.

Thirdly, the transformative journey Eve experienced from a chauvinist to a real womandemonstrates that femininity, rather than an inherent quality, is the result of social influenceand persistent imitations.

Through the demythologizing of those female archetypes, Carter overthrows thepatriarchal hegemony as well as Utopian matriarchal dreams,offering androgyny as a potentialsolution to the current sexual conflicts. In her opinion, the real reconciliation between twogenders should be based on mutual respect and understanding, which is confirmed by theunion between the new Eve and Tristessa in The Passion of New Eve.

Keywords: female archetype; demythologizing; Angela Carter; The Passion of New Eve

Abstract

In recent years, with the development of the financial sector, more and morepeople pay attention to the financial information search. However, the traditionalkeyword search method could hardly meet the needs of financial users. Therefore,semantic search products have gained more popularity. However, the semanticparsing process is complex and diverse. During the process of the analysis oflarge-scale real text, the sentence analysis which based on word granularity is verydifficult, but after chunk analysis, the accuracy can be significantly improved andthe complexity can be clearly reduced. At present, the user input method is almostthe Pinyin input method, thus it could probably happen that the input phonetic lettersare correct, while the Chinese character is wrong. In order to achieve the purpose ofimproving the user experience, the Pinyin text proofreading appears.

The content of this paper is a pretreatment subsystem of the finance Q & Asystem, and it contains two functions, Pinyin text proofreading and chunk partition.

Text proofreading is based on Pinyin, in the first place, putting the query sequenceinto phonetic sequence. Then it uses the multiple grammars, three grammars and twogrammars to fill the Chinese characters sequence. And if there is no ambiguity whenfilling, then it uses the text proofreading, otherwise, ignores the text proofreading.

For the chunk partition, this paper uses three different methods: the method ofthe shortest path chunk partition, the method of CRF chunk partition and the methodof neural network chunk partition. The subsystem designed and implemented thethree methods. The shortest path chunk partition is similar to the dictionary wordsegmentation method. CRF chunk partition divided the problem into the annotationproblem, through getting the optimal sequence labels, to reach the purpose of chunkpartition. Chunk neural network chunk partition is based on word segmentation,changing the query sequence into a sequence of nodes. If the sequence of possibilityimproved after adding chunk tag on each node sequence, the tag position is a chunkposition.

In practical test, the shortest path chunk partition based on the dictionary,cannot process the query which is not in the dictionary of chunk. CRF chunkpartition can solve the unknown chunk query, but the mark information is too simplewhen the training corpus increased,and the error percentage of results increasedsignificantly. When using neural networks in chunk partition, the predicted timeincreases significantly, however, the query generalization is a good idea. Throughthe above research, a reasonable way to chunk partition is the CRF method, whichproperly uses the query generalization.

Finally after testing, the pretreatment subsystem has not only met the needs ofthe finance Q & A system, largely improving the financial Q & A system userexperience, but also reduces the analytical complexity, significantly improved thecorrectness and performance.

Keywords: Pretreatment system question analysis, chunk, text proofreading, CRF,neural network

英语论文格式

英语论文格式、标准论文格式模板
用CNKI中国知网免费入口整本下载英语论文范文的方法
最新最全免费下载英语论文、毕业论文范文的方法【很实用】
论文范文、毕业论文、开题报告范文不限量免费下载的方法
通用论文范文的免费不限量下载方法【超实用】

英语论文的格式

英语论文的格式

在个人成长的多个环节中，大家一定都接触过论文吧，论文是对某些学术问题进行研究的手段。写论文的注意事项有许多，你确定会写吗？下面是我帮大家整理的英语论文的格式，欢迎大家分享。

论文的'规格：正文长度 5，500—8，500 单词。

使用的语言：英语

论文分题目、引言、正文、参考文献、致谢等部分。

引文要注明出处。直接引用要加引号，间接引文要以转述的方式出现。然后以括号把引文来源写清楚：(作者名，年份，引文所在页码)

论文正文部分：

1、 题目大写，三号字，新时代罗马字，大写下面可写一个附标题，4号字;

2、 作者名，5号字，班级，学号

3、 指导教师名，5号字，职称

4、 摘要：用300词，5号字, 英文一页,中文一页

5、 关键词：不能用专有名词，词与词之间空四格(或一个tab键)，不加标点符号

6、 正文：用5号字, 大部分标题用5号字黑体、小部分、小小部分。大部分用罗马字，小不分用一般数字符号：

引言：引入正题，不超过2段

7、 参考文献(bibliography)：先英文,后中文

作者名，出版年月，文章名/书刊名，出版社，地点

9、致谢(acknowledgement)

五、 毕业论文质量标准

(一)选题恰当、与毕业生的知识水平与认识能力相当;

(二)内容丰富、资料翔实、论证充分有力;

(三)观点正确、逻辑性强、无违反国家大政方针的观点;

(四)叙述清楚、层次清晰而丰富;

(五)语言表达正确，无拼写错误、语言错误控制在20-25(万分之二十到二十五);

(六)用词、造句、谋篇、布局等方面无明显失误，修辞错误率控制在2%。

1.文章标题 英文标题一般在10个实词以内,最多不超过15个实词,避免使用非公知公用的缩略词,代号等.

2. 论文如有涉密问题或已在公开期刊上发表,请在篇首页地脚处注明.

3. 摘要 英文摘要一般为150-180个实词,中文摘要一般在300字以内,中英文摘要应基本一致.其内容应包括研究目的,方法,结果,结论等,禁用"本文","作者","This paper"等作主语.详见"科技期刊文章摘要的写作要求".

4. 关键词 每篇文章可选3～8个能反映文章主要内容的单词,词组或术语.英文关键词应与中文关键词相对应.

5中图分类号 请查《中国图书馆分类法》.

6. 正文 正文篇幅一般希望控制在成书5页(记空格,图表占位)以内.内容力求有创新,论证严谨,语句通顺,文字精炼.

7.文中正体,斜体,黑体字符的用法:

⑴斜体.变量名称用斜体单字母表示;下标若是由变量转化来的则用斜体;坐标轴(如x,y)和变量(如i,j)用斜体.

⑵正体.下标由文字转化来的说明性字符用正体;单位,词头用正体,如nm,pF等;几个特殊常量用正体,如e,i,π等.

⑶黑体.矩阵,矢量名称用黑体表示.

8.图形要求

图中所有线条,文字必须用黑色绘制;用线形或标识符区分;不得有背景;

图中线条须清晰,均匀,刻度线向内侧画,并且间隔应均匀;

图中坐标线粗0.5磅,曲线宽度为坐标线宽度的3倍;

9.表格要求 表格采用三线表,表头中使用物理量符号/单位,如下例:

10.参考文献 来稿引用他人观点与材料,须将参考文献按正文中出现的先后次序列于文后,文中须在引用处右上角加注"「序号」".中文参考文献必须列出相应的英文,并在后面加注"(in Chinese)".引文作者姓名均为姓前名后,最多标3名,余下用"et al."代表.

著录格式为:(按不同析出物分类说明)

「连续出版物」 主要作者.题名「J」 .刊名,年,卷(期):起止页码.

「专著」 主要作者.书名「M」 .出版地(城市名):出版者,出版年.起止页码.

「译著」 主要作者.书名「M」 .译者.出版地(城市名):出版者,出版年.起止页码.

「论文集」 主要作者.题名「A」 .编者.论文集名「C」 .出版地(城市名):出版者,出版年.起止页码.

「会议论文」 主要作者.题名「Z」 .会议名称,会议召开地(城市名),召开年.

「学位论文」 作者.题名「D」 .所在城市:保存单位,年份.

「研究报告」 主要作者.题名「R」 .报告代码及编号(或:保存地点:责任单位),年份.

「报纸」 作者名.文章名「N」.报纸名,出版日期(版次).

「电子文献」 作者.题名「EB/OL」 .发表或更新日期/引用日期.

「专利」 申请者.专利名「P」 .专利国名:专利号,发布日期.

「技术标准」 技术标准代号,技术标准名称「S」 .