铝模板方向论文

您好，建筑模板领域目前市面上，中鑫绿建超强复合模板就是一款历时8年，耗资3亿才研发成功的新型环保科技建材，与传统模板相比，材料、工艺、技术都有所提升。传统模板表面直接采取木皮或者采取三胺沁纸，这种面皮不防水，一接触混凝土即产生粘合脱皮，混凝土结构非常粗糙，很难脱模，对模板损坏大；绿建模板采取高分子纤维面皮覆面，具有高强度、耐高温、耐磨、耐酸碱、不渗水、不粘混凝土等特点，易脱模，混凝土结构平整光滑，经使用验证，已经完全达到清水效果。传统模板采用的是横向工艺技术，板芯由九层木皮通过胶水粘合而成，受原材料水分、胶水质量、涂胶均匀度、人工铺板工艺、热压温度、压力等诸多因素影响，所以产品具有易起泡爆开、易脱层、厚薄不均、强度差、扭曲变形、表面粗糙等缺点；绿建模板采取不脱层竖向结构板芯结构，厚薄极其均匀且强度高，整体结构不脱层。传统模板因工艺问题，只能生产1830×915和1220×2440两种规格，到工地后必须裁切，浪费材料，浪费人工，浪费时间；绿建模板可根据工程结构定制化、定位化、标准化生产，节约大量材料、时间和人工。传统模板因材质问题，一般只可周转5-8次；绿建模板性能提升，因此使用率提高，可周转60-80次。希望我的回答帮助到您！

专著（Book Chapter）（*通讯作者）27、Ma, J.*; Yu, F.; Ma, B. Y., “Single-walled carbon nanotubes: different-diameters, different properties, and different applications”, Carbon Nanotubes Synthesis, Properties and Applications, NOVA Science Publishers, 2012.论文：26、Ma, J.; Wang, J. N., Purification of single-walled carbon nanotubes by a highly efficient and nondestructive approach, Chem. Mater., 2008, 20, 2895-2902. (SCI, . )25、Ma, J.; Wang, J. N., Preparation of water-dispersible single-walled carbon nanotubes by freeze-smashing and application as a catalyst support for fuel cells,J. Mater. Chem., 2010, 27, 5742-5747.(SCI, . )24、Ma, J.; Wang, J. N., Large-diameter and water-dispersible single-walled carbon nanotubes: Synthesis, characterization and applications, J. Mater. Chem., 2009, 19, 3033-3041.( SCI, )23、Yu, F, Wu, Y. Q.，Ma, J*, Influence of the pore structure and surface chemistry on adsorption of ethylbenzene, xylene isomers by KOH-activated multi-walled carbon nanotubes. J. ., 2012, DOI: .(SCI, . )22、Yu, F, Chen J. H, Chen L, Huai J, Gong W. Y., Yuan Z. W., Wang J. H., Ma, J*, Magnetic carbon nanotube synthesized by Fenton's reagent method and their potential application for the removal of azo dye from aqueous solution, J. Colloid Interface Sci., 2012, 378(3), 175-183(SCI, . )21、Yu, F, Chen J. H, Yang, M. X., Li, F. L., Su, C., Yuan, Z. W., Yu, L. L., Zhou, L., Jin, L., Ma, J*, A facile one-pot method to synthesis low-cost magnetic carbon nanotubes and the application of dye removal, New J. Chem., 2012, 36 (10), 1940-1943 (SCI, . )20、Ma, J*.; Yuan Z. W, Chen, J. H, Diameter-dependent thermal-oxidative stability of single-walled carbon nanotubes synthesized by a floating catalytic chemical vapor deposition method, Appl. Surf. Sci., 2011, 257, 10471-10476(SCI, . )19、Yu, F, Wu, Y. Q., Ma, J*, Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents：kinetics, isotherms and thermodynamics. J. Environ. Sci., 2012.( SCI, . )18、Yu, F, Yang, M. X., Li, F. L., Su, C., Ma, B. Y., Yuan, Z. W., Chen, J. H., Ma, J*, The growth mechanism of single-walled carbon nanotubes with a controlled diameter, Physica E, 2012, 44: 2032–2040(SCI, . )17、Ma, J.; Wang, J. N., Control of the diameters of single walled carbon nanotubes and related nano-chemistry and nano-biology, Front. Mater. Sci., 2010, 4, 17-28.(特邀综述)16、Wu, Z. P.; Wang, J. N.; Ma, J., Methanol-mediated growth of carbon nanotubes, Carbon, 2008, 47, 324-327. (SCI, . )15、Yu, F; Ma, J.; Wu, Y. Q., Adsorption of toluene, ethylbenzene and m-xylene on multi-walled carbon nanotubes with different oxygen contents from aqueous solutions, J. , 192(3), 1370-1379 (SCI, . ) 14、Niu, J. J.; Xie, J.; Su, L. F.;Ma, J., An approach to carbon nanotubes with high surface area and large pore volume, Micropor. Mesopor. Mat., 2007, 100, 1-5. (SCI, . )13、Yu, F; Ma, J.; Wu, Y. Q., Adsorption of toluene, ethylbenzene and xylene isomers on multi-walled carbon nanotubes oxidized by different concentration of NaOCl, Front. Environ. Sci. En., 2012, 6(3): 320–329 (SCI, . )12、Wu, Z. P.; Xu, Q. F.; Wang, J. N.; Ma, J., Preparation of large area double-walled carbon nanotube macro-films with self-cleaning properties, J. Mater. Sci. Technol., 2010, 26, 20-26. (SCI, . )11、马杰，虞琳琳，金路，袁志文，陈君红，改性碳纳米管原始样品吸附亚甲基蓝染料性能研究，环境化学，2012, 31(5), 646-65210、于飞，周露，杨明轩，陈君红，袁志文，马杰，柔性碳纳米管透明导电薄膜国内外研究进展，功能材料，2012，43 (15): 1969-19759、金路，高振威，怀静，张雪，郭文瑞，周露，陈君红，袁志文，汤宇航，栾敬帅，范海波，马杰，二氧化钛纳米管阵列的制备工艺对其光催化性能的影响，功能材料，20128、周露，陈君红，袁志文，马杰，芬顿试剂法制备磁性碳纳米管及其吸附亚甲基蓝的性能研究, 环境化学，2012, 31(5), 669-6767、马杰, 吴玉程, 电沉积法制备Cu/Al2O3纳米复合材料及其光吸收特性研究, 复合材料学报, 2006, 23, 、马杰, 吴玉程, 李广海, 化学沉积Co-Fe-P纳米涂层结构与磁学性能研究, 金属功能材料, 2004, 01:、虞琳琳，马杰，袁志文，虞晓敏，陈君红，次氯酸钠改性磁性碳纳米管吸附剂的制备及吸附性能研究，水处理技术，2011，37(10) 21-254、吴玉程，马杰，张立德，氧化铝有序阵列模板制备工艺研究及应用，中国有色金属学报，2005，74，680-6873、吴玉程，马杰，多孔阳极氧化铝模板的制备及其光学特性研究，功能材料与器件学报, 2005, 11, 440-4442、吴玉程，叶敏，马杰，处理工艺对阳极氧化铝模板光学性能的影响,材料热处理学报, 2006, 27(1): 、吴玉程，叶敏，解挺，马杰，电沉积二氧化钛功能薄膜的制备与组织转变研究，人工晶体学报，2006，35(3):612-616.会议：5、Ma, J.; Yuan, Z. W.; Chen, J. H., Enhanced adsorptive removal of methyl orange and methylene blue from aqueous solution by alkali-activated multi-walled carbon nanotubes. 244th ACS National Meeting & Exposition. Philadelphia, USA, 2012. (Poster presentation)4、Ma, J.; Yuan, Z. W.; Chen, J. H., Green-chemical synthesis of a novel magnetic multiwalled carbon nanotube/iron oxide hybrid as methyl orange adsorbent. International Conference on Nanoscience & Technology, China, 、Ma, J.; Yuan, Z. W.; Chen, J. H., Removal of methyl orange from aqueous solutions by novel magnetic multiwalled carbon nanotube/iron oxide hybrids, Annual World Conference on Carbon (Carbon 2011), China, 、周露，马杰*，袁志文，陈君红, 芬顿试剂法制备磁性碳纳米管及其吸附亚甲基蓝的性能研究, 第六届全国环境大会，上海，20111、马杰，虞琳琳，袁志文，陈君红*，改性碳纳米管原始样品吸附亚甲基蓝染料性能研究，第六届全国环境大会，上海，2011