淀粉污水处理工艺毕业论文

可以去有道翻译啊，还不简单。老师又不怎么看。

淀粉生产过程所排放的废水中含有大量有机污染物，马铃薯淀粉废水的COD值通常为1000～30000mg/L。由于马铃薯淀粉废水属于高浓度有机废水，在实际工程中其处理方法主要以生化法为主。试验认为Fenton试剂氧化可作为淀粉废水的预处理方法。高浓度的有机淀粉废水，通过采用物化絮凝和吸附柱吸附处理后，废水COD去除率为54%～65%。采用PAC和PAM混凝处理马铃薯淀粉废水，废水的COD去除率达，SS去除率达到。采用混凝沉淀-泡沫分离-吸附工艺处理马铃薯淀粉废水，结果表明，采用该法处理后，淀粉废水的总COD去除率达到，处理效果较好。

湖北省武汉市A厂马铃薯淀粉生产废水处理工程设计

好难啊，我暂时只是个高三生（刚高考完），我尽量吧，等我译完再给你…不好意思……这个：翻译器给的，也有点帮助Potato starch as raw materials will produce large amounts of wastewater containing high concentrations of organic matter, if discharged directly into water bodies will result in water pollution. In order to achieve environmental protection goals must be appropriate for these wastewater treatment in order to meet emissions standards. This topic is Qingshan District A starch factory design appropriate structures to discharge sewage to reach the required standard. Look under the water quality of the plant, BOD and COD concentrations are high, and the provisions of the concentration of BOD and COD emissions are very low; and is different from other water quality characteristics of the NaCl concentration in the effluent is high, a high salt water, This is sure to make some sewage treatment capacity of sewage structures change. Comprehensive on several factors, by comparing the design with today's more commonly used domestic and foreign treatment of starch wastewater in UASB-SBR technology to wastewater treatment plant. And the main structures of the wastewater treatment plant, sewage plant general layout and elevation layout of a detailed calculation and : structure of starch wastewater treatment plant effluent waste water with high salt and general layout issues added elevation layout BOD COD:Wuhan, Hubei Province A production of potato starch wastewater treatment plant engineering design