This paper introduced a single-chip microcomputer 89C52 mainly about the single-chip microcontroller applications, as well as the history of the future. On the 89C52 single chip is adopted to achieve the clock, alarm clock, stopwatch functions to set out. Which interspersed about 7447 chips, digital control equipment and other hardware on peripherals. With the social development, automation is becoming increasingly popular, Microcontroller, PLC, will be widely used. After the development of several generations of single-chip, is now more mature. Or whether it is the daily life of industrial applications, can be seen everywhere SCM figure. Moreover, single-chip low cost, development cost is very low. If equipped with appropriate peripheral devices, single chip numerous functions can be achieved. Single-chip C language or languages can be assembly language, as long as the study had high-level language, microcontroller programming would become very easy.
In recent years, with the rapid development of science and technology, the application of SCM is unceasingly thorough. In real-time detection and automatic control of microcomputer application system, its often as a core component to use. But only the microcontroller knowledge is not enough, should be based on the hardware structure, perfect soft combination. Most current universities have established the microcontroller laboratory, basically equipped with experiment box and other hardware simulation equipment. But experiment box hardware circuit fixed, experiment content more difficult change, is hard to adapt to the rapid development of single chip microcomputer and cultivate students' SCM development ability, innovation ability. Using the Proteus software simulation technology, can to a certain extent make up for the shortage, build a virtual experimental platform, can achieve more practice, provide students to learn to disciplinary construction of conditions, has a positive meaning. In view of this, this article based on the single-chip microcomputer simulation environment, Proteus MICOCHIP company by the PIC microcontroller as the main control chip series with data storage units, combined with peripheral infrared sensor, LCD display, temperature sensing, dc motors, heating DianLuSi, alarm equipment, written in C control program main control chip design combines a automatic temperature monitoring and artificially infrared temperature adjustment is an organic whole, have alarm function of temperature control system. This design fully exert Proteus characteristics, reduce the cost and enhance practicability, benefit in university promotion.
In recent years, with the rapid development of science and technology, the application of single chip is accepted broadly in real-time detection and automatic control of microcomputer. Although it’s often act as the core component of single chip system, it is not enough only with the knowledge of single chip. Engineers also need to think about the structure of the hardware to perfect the system.Currently most higher education institutions have built single chip laboratory, equipped with experiment box and other hardware simulation equipment. But the circuitry of the experiment box is fixed and the experiment steps are hard to be changed. It is not fit the trend of rapid development speed of single chip technology. It is also unsuited to develop students’ abilities and creativities. With the introduction of the Proteus software simulation technology, it can be solved at a certain extent. We could design more experiment steps and help students completing their self-study with the simulation experimental platform. It is a positive technology for system construction. Based on the information above, the author design a temperature alarm system with functions of automatic temperature monitoring and artificially infrared temperature adjustment. This system is created based on the single-chip microcomputer simulation environment, using the PIC single chip of MICOCHIP ltd as the main control chip, combined with peripheral infrared sensor, LCD display, temperature sensing, dc motors, heating electric stove wire and alarm equipment. The control system of main chip and main program was written in C program.This design has the advantages of reducing cost and increase practicability. It is could be adopted by most higher education institutions.
你这比花钱毕业设计还可恶至少人家还承认别人劳动你这不仅笨 而且懒
大学生呀！！
In recent years, with the rapid development of science and technology, the application of single chip is accepted broadly in real-time detection and automatic control of microcomputer. Although it’s often act as the core component of single chip system, it is not enough only with the knowledge of single chip. Engineers also need to think about the structure of the hardware to perfect the system.Currently most higher education institutions have built single chip laboratory, equipped with experiment box and other hardware simulation equipment. But the circuitry of the experiment box is fixed and the experiment steps are hard to be changed. It is not fit the trend of rapid development speed of single chip technology. It is also unsuited to develop students’ abilities and creativities. With the introduction of the Proteus software simulation technology, it can be solved at a certain extent. We could design more experiment steps and help students completing their self-study with the simulation experimental platform. It is a positive technology for system construction. Based on the information above, the author design a temperature alarm system with functions of automatic temperature monitoring and artificially infrared temperature adjustment. This system is created based on the single-chip microcomputer simulation environment, using the PIC single chip of MICOCHIP ltd as the main control chip, combined with peripheral infrared sensor, LCD display, temperature sensing, dc motors, heating electric stove wire and alarm equipment. The control system of main chip and main program was written in C program.This design has the advantages of reducing cost and increase practicability. It is could be adopted by most higher education institutions.
Single-chip microcontroller that micro-computer (Single-Chip Microcomputer) gathering CPU, RAM, ROM, the timing, number and variety of interface integrated microcontrollers. Widely used in various fields. In this paper, the music alarm clock designed by AT89S53 SCM control. The music alarm clock from SCM system is the smallest system and the expansion of LED display circuit and voice circuit. Using single-chip C programming language, can be set to achieve a number of alarm clocks, alarm clocks on time to play music, and showing the date and other functions. This paper introduces the music alarm clock software and hardware design, and design, debugging process of the problems encountered and solutions. The topics designed music alarm system is simple, cost, low-cost, multifunctional, with a very strong sense of practicality. Keywords : music, simple arrangements, clock timing 题目:SCM Application Development-music electronic clock design 希望对您有所帮助，祝您成功！
In recent years, with the rapid development of science and technology, the application of SCM is unceasingly thorough. In real-time detection and automatic control of microcomputer application system, its often as a core component to use. But only the microcontroller knowledge is not enough, should be based on the hardware structure, perfect soft combination. Most current universities have established the microcontroller laboratory, basically equipped with experiment box and other hardware simulation equipment. But experiment box hardware circuit fixed, experiment content more difficult change, is hard to adapt to the rapid development of single chip microcomputer and cultivate students' SCM development ability, innovation ability. Using the Proteus software simulation technology, can to a certain extent make up for the shortage, build a virtual experimental platform, can achieve more practice, provide students to learn to disciplinary construction of conditions, has a positive meaning. In view of this, this article based on the single-chip microcomputer simulation environment, Proteus MICOCHIP company by the PIC microcontroller as the main control chip series with data storage units, combined with peripheral infrared sensor, LCD display, temperature sensing, dc motors, heating DianLuSi, alarm equipment, written in C control program main control chip design combines a automatic temperature monitoring and artificially infrared temperature adjustment is an organic whole, have alarm function of temperature control system. This design fully exert Proteus characteristics, reduce the cost and enhance practicability, benefit in university promotion.
Single-Chip Microcomputer有的时候，也可以用SingleChip来代替下面链接的第六章有讲单片机Single Chip Microcmputer 第148页开始这是一段中汉对照的。中文:单片机是把主要计算机功能部件都集成在一块芯片上的微型计算机。它是一种集计数和多中接口于一体的微控制器，被广泛应用在智能产品和工业自动化上，而51单片机是个单片机中最为典型和最有代表性的一种。本课题选择89S51为核心控制元件，设计了一个日常生活中用到的电子音乐门铃系统。当功能按键按下，音乐响起，发光二极管随着音乐的节拍进行闪烁，LED显示相应的定时器初值。音乐演奏过程中再次按下按键无效，只有当音乐段结束再次按下才有效。如果是电子音乐门铃在响，按下复位按键就终止，显示初始状态。经过实践证明，本系统运行稳定，具有一定的实用价值。-------------翻译:SCM is a major piece of computer components are integrated into the chip micro-computer. It is a multi-interface and counting on the micro-controller integration, and intelligence products are widely used in industrial automation. and MCS-51 microcontroller is a typical and representative.The topics chosen for the 89S51 control of the core components used in the design of a daily electronic music doorbell system. When the function button is pressed, the music sounded and the music beats with light emitting diodes for flickered. Initial corresponding LED timer. Musical process again pressed the button ineffective, and only when pressed again before the end of the music effectively. If the doorbell ring for electronic music, press the button on the reduction and termination, showed initial state. Practice has proved that the system is stable and has some practical value.本设计是以凌阳16位单片机为重心，介绍语音控制在机械手中的应用，实现微型舵机的运作，完成所指定的动作。其中通过凌阳16位单片机输出的脉冲信号来准确的控制机械手的摆动角度，机械手的捏拿动作由电磁铁完成，电磁铁的通断由凌阳16位单片机的I/O口控制，硬件和软件都在具体的实验中证明了其可行性This design is take insults the positive 16 monolithic integrated circuits as a center of gravity, introduced the pronunciation control in manipulator's application, the realization miniature servo operation, completes the movement which assigns. Through insults the pulse signal which the positive 16 monolithic integrated circuits outputs to come the accurate control manipulator to swing the angle, the manipulator pinches takes the movement to complete by the electro-magnet, the electro-magnet passes the legal reason for judgment to insult the positive 16 monolithic integrated circuits I/O control, the hardware and the software all have proven its feasibility in the concrete experiment
单片机又称单片微控制器,它不是完成某一个逻辑功能的芯片,而是把一个计算机系统集成到一个芯片上。相当于一个微型的计算机，和计算机相比，单片机只缺少了I/O设备。概括的讲：一块芯片就成了一台计算机。它的体积小、质量轻、价格便宜、为学习、应用和开发提供了便利条件。同时，学习使用单片机是了解计算机原理与结构的最佳选择。SCM is also known as single chip microcontroller, it is not complete a certain logic function of the chip, but a computer system integrated into a chip. The equivalent of a microcomputer, and compared to the computer, the single chip is only a lack of I/O equipment. Generally speaking: a chip has become a computer. Its small size, light weight, cheap, for the study, application and development provides a convenient condition. At the same time, learning to use the MCU is the best choice to understand the principle and structure of the computer.单片机的使用领域已十分广泛，如智能仪表、实时工控、通讯设备、导航系统、家用电器等。各种产品一旦用上了单片机，就能起到使产品升级换代的功效，常在产品名称前冠以形容词——“智能型”，如智能型洗衣机等SCM has a very wide range of applications, such as intelligent instruments, real-time industrial control, communications equipment, navigation systems, household appliances, etc.. Once a variety of products with the use of a single chip, you can play the product to upgrade the effectiveness, often in the product name preceded by the adjective - "intelligent", such as intelligent washing machines, etc.
现在好多学生都拿百度知道解决作业了……
PS 你们老师不会真的看内容的 直接翻译一下说的过去就行了囧 流水灯也能做毕业论文……
我的毕业论文就是用google翻的，理科导师根本看不懂，看得懂也不会去看的，只要关键词翻译对就可以了。
电子工程师之家 这个网站上很多很多很多很多很多很多很多很多很多很多很多很多很多很多
我也是做流水灯的毕业论文,英文部分太难找了,给个建议吧
问题一：毕业论文外文翻译是什么意思？有什么要求？ 外文翻译要求：（1）选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。（2）选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。（3）外文翻译字数要求3000字以上，从外文互章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。 问题二：毕业设计的外文翻译有字数要求吗 难道你们的任务书没有要求么？不然问问指导老师啊~不同学校不同专业要求也会不一样。 问题三：外文翻译需要注意的地方和遵守的原则有哪些？ 任何外文翻译不需遵循的三条黄金原则是：1。信：意思是要忠实于原文的信息，不能改变原文的意思，尤其是翻译科技类，经济类文章，这条很重要2。达：就是要通顺，要尊重目标语言的习惯，比如将英文翻译成中文时，要在坚持“信”的原则下，是翻译更加贴近中文的习惯。3。雅：要有文采。当然这也可以称之为翻译的三种境界，它们三者是相互联系而非矛盾的。 问题四：硕士论文对国外文献有数量要求吗？ 学校规定的是外文数量不少于总文献数量的1/3，当然了只是个规定而已，也没有人去专门查查到底占到几分之几，各个学校的规定到不一样。总之尽量多弄点英文文献吧，你懂的！ 参考文献可以在百度学术中找到。 毕业论文参考文献规范格式 一、参考文献的类型 参考文献（即引文出处）的类型以单字母方式标识，具体如下： M――专著 C――论文集 N――报纸文章 J――期刊文章 D――学位论文 R――报告 对于不属于上述的文献类型，采用字母“Z”标识。 对于英文参考文献，还应注意以下两点： ①作者姓名采用“姓在前名在后”原则，具体格式是：姓，名字的首字母. 如： Malcolm Richard Cowley 应为：Cowley, M.R.，如果有两位作者，第一位作者方式不变，&之后第二位作者名字的首字母放在前面，姓放在后面，如：Frank Norris 与Irving Gordon应为：Norris, F. & I.Gordon.； ②书名、报刊名使用斜体字，如：Mastering English Literature，English Weekly。 二、参考文献的格式及举例 1.期刊类 [格式][序号]作者.篇名[J].刊名，出版年份，卷号（期号）：起止页码. [举例] [1] 王海粟.浅议会计信息披露模式[J].财政研究，2004,21(1)：56-58. [2] 夏鲁惠.高等学校毕业论文教学情况调研报告[J].高等理科教育，2004(1):46-52. [3] Heider, E.R.& D.C.Oliver. The structure of color space in naming and memory of two languages [J]. Foreign Language Teaching and Research, 1999, (3): 62 C 67. 2.专著类 [格式][序号]作者.书名[M].出版地：出版社，出版年份：起止页码. [举例][4] 葛家澍，林志军.现代西方财务会计理论[M].厦门：厦门大学出版社，2001：42. [5] Gill, R. Mastering English Literature [M]. London: Macmillan, 1985: 42-45. 3.报纸类 [格式][序号]作者.篇名[N].报纸名，出版日期（版次）. [举例] [6] 李大伦.经济全球化的重要性[N]. 光明日报，1998-12-27(3). [7] French, W. Between Silences: A Voice from China[N]. Atlantic Weekly, 1987-8-15(33). 4.论文集 [格式][序号]作者.篇名[C].出版地：出版者，出版年份：起始页码. [举例] [8] 伍蠡甫.西方文论选[C]. 上海：上海译文出版社，1979：12-17. [9] Spivak,G. “Can the Subaltern Speak?”[A]. In C.Nelson & L. Gros *** erg(eds.). Victory in Limbo: Imigi *** [C]. Urbana: University of Illinois Press, 1988, pp.271-313. [10] Almarza, G.G. Student foreign language teacher’s knowledg......>> 问题五：请问本科生毕业论文需要英文翻译吗？？？谢谢…… 每个学校的要求不完全相同。但是摘要和关键词肯定需要翻译成英文的。。 问题六：毕业论文外文文献翻译没有摘要关键词可以吗？ 10分 论文一般由题名、作者、摘要、关键词、正文、参考文献和附录等部分组成，其中部分组成（例如附录）可有可无。论文各组成的排序为：题名、作者、摘要、关键词、英文题名、英文摘要、英文关键词、正文、参考文献和附录和致谢。 下面按论文的结构顺序依次叙述。 题目 (一)论文――题目科学论文都有题目，不能“无题”。论文题目一般20字左右。题目大小应与内容符合，尽量不设副题，不用第1报、第2报之类。论文题目都用直叙口气，不用惊叹号或问号，也不能将科学论文题目写成广告语或新闻报道用语。 署名 (二)论文――署名科学论文应该署真名和真实的工作单位。主要体现责任、成果归属并便于后人追踪研究。严格意义上的论文作者是指对选题、论证、查阅文献、方案设计、建立方法、实验操作、整理资料、归纳总结、撰写成文等全过程负责的人，应该是能解答论文的有关问题者。往往把参加工作的人全部列上，那就应该以贡献大小依次排列。论文署名应征得本人同意。学术指导人根据实际情况既可以列为论文作者，也可以一般致谢。行政领导人一般不署名。 引言 (三)论文――引言是论文引人入胜之言，很重要，要写好。一段好的论文引言常能使读者明白你这份工作的发展历程和在这一研究方向中的位置。要写出论文立题依据、基础、背景、研究目的。要复习必要的文献、写明问题的发展。文字要简练。 材料方法 (四)论文――材料和方法按规定如实写出实验对象、器材、动物和试剂及其规格，写出实验方法、指标、判断标准等，写出实验设计、分组、统计方法等。这些按杂志对论文投稿规定办即可。 实验结果 (五)论文――实验结果应高度归纳，精心分析，合乎逻辑地铺述。应该去粗取精，去伪存真，但不能因不符合自己的意图而主观取舍，更不能弄虚作假。只有在技术不熟练或仪器不稳定时期所得的数据、在技术故障或操作错误时所得的数据、不符合实验条件时所得的数据才能废弃不用。而且必须在发现问题当时就在原始记录上注明原因，不能在总结处理时因不合常态而任意剔除。废弃这类数据时应将在同样条件下、同一时期的实验数据一并废弃，不能只废弃不合己意者。 实验结果的整理应紧扣主题，删繁就简，有些数据不一定适合于这一篇论文，可留作它用，不要硬行拼凑到一篇论文中。论文行文应尽量采用专业术语。能用表的不要用图，可以不用图表的最好不要用图表，以免多占篇幅，增加排版困难。文、表、图互不重复。实验中的偶然现象和意外变故等特殊情况应作必要的交代，不要随意丢弃。 讨论 (六)论文――讨论是论文中比较重要，也是比较难写的一部分。应统观全局，抓住主要的有争议问题，从感性认识提高到理性认识进行论说。要对实验结果作出分析、推理，而不要重复叙述实验结果。应着重对国内外相关文献中的结果与观点作出讨论，表明自己的观点，尤其不应回避相对立的观点。论文的讨论中可以提出假设，提出本题的发展设想，但分寸应该恰当，不能写成“科幻”或“畅想”。 问题七：你们有什么问题要问我的吗 英文翻译 答案Do you have any questions you would like to ask me采纳我吧！ 问题八：文献综述有字数要求吗.... 有，4000字左右，一般要看期刊的要求！ 问题九：英文翻译：我们应该提交哪些资料？ What data should we submit?问句应该用疑问句语序。
毕业论文外文翻译：将外文参考文献翻译成中文版本。
翻译要求：
1、选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。
2、选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。
3、外文翻译字数要求3000字以上，从外文文章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。
参考文献是在学术研究过程中,对某一著作或论文的整体的参考或借鉴.征引过的文献在注释中已注明,不再出现于文后参考文献中。外文参考文献就是指论文是引用的文献原文是国外的，并非中国的。
原文就是指原作品,原件，即作者所写作品所用的语言。如莎士比亚的《罗密欧与朱丽叶》原文是英语。 译文就是翻译过来的文字，如在中国也可以找到莎士比亚《罗密欧与朱丽叶》的中文版本，这个中文版本就称为译文 。
扩展资料：
外文翻译需要注意的问题
1、外文文献的出处不要翻译成中文，且写在中文译文的右上角（不是放在页眉处）；会议要求：名称、地点、年份、卷（期），等 。
2、作者姓名以及作者的工作单位也不用必须翻译。
3、abstract翻译成“摘要”，不要翻译成“文章摘要”等其他词语。
4、Key words翻译成“关键词” 。
5、introduction 翻译成“引言”(不是导言)。
6、各节的标号I、II等可以直接使用，不要再翻译成“第一部分”“第二部分”，等。
7、注意排版格式，都是单排版，行距1.25，字号小4号，等（按照格式要求）。
8、里面的图可以拷贝粘贴，但要将图标、横纵指标的英文标注翻译成中文。
9、里面的公式、表不可以拷贝粘贴，要自己重新录入、重新画表格。
CS方向sci三区的一个小刊，之前也是major revision，大四毕业了才中了。。所以在我心目中MV几乎约等于AC，虽然这辈子只投过一篇文章。北京译顶科技做的不错，可以联系他们一下 统一查下。
在毕业论文写作过程中阅读翻译外文文献是一个非常重要的环节，尤其是研究生同学，一般导师都会要求阅读一定数量的英文文献，这是因为许多领域高水平的文献都是外文文献，借鉴一些外文文献翻译的经验是非常必要的。
如何写开题报告，如何写文献综述，如何阅读外文文献，可以说，阅读一定数量的外文文献是毕业论文写作的必经之路。
要求如下：
1、前言
简要说明写作的目的，有关的概念以及综述范围，说明有关主题的现状或争论焦点，所要解决的问题等。一般以 100～200 字为宜，使读者在读完前言后对有关问题获得一个初步的轮廓。
2、主体
主体部分是全文的主要部分，具体写法以能较好地表达综述的内容为准则。通常根据内容的多少，将主体部分分为几段，每段有小标题。
可按年代顺序综述。也可按不同的问题进行综述，还可按不同的观点进行比较综述，不管用那一种格式综述，都要将所搜集到的文献资料归纳、整理及分析比较，阐明有关主题的历史背景、现状和发展方向，以及对这些问题的评述。
主题部分应特别注意代表性强、具有科学性和创造性的文献引用和评述。
主体部分每一段落的开始应是综合提炼出来的观点，即论点；接着是文献所提出的实验结果或调查事实，即论据，可见主体部分是按论点和论据组织材料的。
总之，综述主体部分是以综合概括的论点开头引路，继之以诸家的资料、实验结果为论据展开层次论证。所以，综述也是一种论证文章的体裁，只是论点与论据都是前人文献所提供。
如果前人的观点分散或不甚明确，则需作者整理概括，成为开头。在论述某些观点时，作者可有倾向性，但对相反的观点也应简要如实列出。对存在的矛盾和问题应充分如实描述。
3、总结
常见的方式有：
①扼要的概括、精练主题部分的主要内容；
②介绍尚待解决的问题及对前景的展望；
③某些篇幅较小的综述，也可以省略结束语。
4、参考文献
通常凡引述的资料和主要的论点都应注明文献出处，以便使读者检索查阅。所引文献应以近 3 年内者为主；另外，未公开发表的资料不宜作为参考文献。
在我国许多期刊希望列出重要的参考文献，一般限为 20～30 条为宜；但国际上许多生物医学期刊的综述文章，其参考文献甚多，全篇所列文献常达数百条之多。参考文献的著录格式国内尚不统一，应按各刊「投稿须知」要求撰写。
扩展资料：
1、如何查询国内专利文献
可通过中国国家知识产权局(）和中国专利信息中心（）网站上的「专利检索」。
可以免费检索全部中国专利信息（有文摘）。如需获取专利全文，则需前去中国国家知识产权局查阅，也可通过 CSDL 馆际互借和原文传递系统代为办理。
2、如何查询国外专利文献
科学院用户可首先选择查询 Web of Knowledge 中Derwent Innovations Index (德温特世界专利索引)，它是检索专利的权威数据库，收录全球了 40 多个专利机构的 900 万条基本专利，1800 万项专利，该库大部分有文摘，小部分有全文。
3、其它可供利用的网上免费数据库
欧洲专利局专利数据库：
http://ep.espacenet.com/ （免费 文摘）
美国专利商标局专利数据库：
（免费 文摘、全文）
WTO知识产权组织：
（免费 文摘）
IBM专利数据库资源：
（免费 文摘、部分全文）
更多请参见中国专利信息网上的（国外）专利网站：