• 回答数

    3

  • 浏览数

    350

我来打包带走
首页 > 学术期刊 > 步进电机毕业论文参考英文文献

3个回答 默认排序
  • 默认排序
  • 按时间排序

淡蓝色的蝎子

已采纳

文献1:This project aimed to develop a wireless system to detect and allow only the authorized persons. The system was based on Radio Frequency Identification (RFID) technology and consists of a passive RFID tag. The passive micro transponder tag collects power from the 125 KHz magnetic field generated by the base station, gathers information about the Tag ID and sends this information to the base station. The base station receives, decodes and checks the information available in its Database and Manchester code was used to send those information. The system performed as desired with a 10cm diameter antenna attached to the transponder. The Base Station is built by using the Popular 8051 family Microcontroller. It gets the tag ID and if the tag ID is stored in its memory then the microcontroller will allow the person inside. RFID Reader Module, are also called as interrogators. They convert radio waves returned from the RFID tag into a form that can be passed on to Controllers, which can make use of it. RFID tags and readers have to be tuned to the same frequency in order to communicate. RFID systems use many different frequencies, but the most common and widely used Reader frequency is 125 KHz.全部内容及下载地址:文献2: Choose controller according to your requirements of program memory(flash), RAM, ADC, EEPROM. 16kB of flash is sufficient to implement floodfill algorithm. If you are thinking of implementing floodfill algorithm then 256 bytes are required to store Map of the maze and 512 bytes are required for processing so you need atleast 1kBRAM to implement floodfill. ATmega16,32 and PIC18f452 are some controllerspopularly used in micromouse. If you are thinking of building just a wall follower then simple 8051 based controller likeAT89s52 can also be used. Stepper driving:Please read a step by step stepper motor guidefirst. There are two types of motors a) unipolar b) bipolar. Unipolar stepper motors can be used as bipolar steppers so prefer unipolar whilepurchasing stepper. You can use simple ULN2803 IC the circuit can be found in 8051 microcontroller by Mazidi. ULN2803 has eight darlington pair in a single package. It hascurrent carrying capacity of 500mA. so it will get heated up frequently will get two ULN2803 can be connected in parallel to fix the problem but this is a chalta haiway of driving stepper. 全部见: 文献3:Stepper Motor Advantagesand DisadvantagesAdvantages1. The rotation angle of the motor isproportional to the input . The motor has full torque at stand-still (if the windings are energized)3. Precise positioning and repeat-ability of movement since goodstepper motors have an accuracy of3 – 5% of a step and this error isnon cumulative from one step tothe . Excellent response to starting/stopping/. Very reliable since there are no con-tact brushes in the the life of the motor issimply dependant on the life of . The motors response to digitalinput pulses provides open-loopcontrol, making the motor simplerand less costly to . It is possible to achieve very lowspeed synchronous rotation with aload that is directly coupled to . A wide range of rotational speedscan be realized as the speed isproportional to the frequency全文见:

190 评论

最後放縦

本毕业设计课题是属于教师拟定性课题,主要是研究基于单片机的对步进电机的有效控制。步进电机是一种能将数字输入脉冲转换成旋转或直线增量运动的电磁执行元件,每输入一个脉冲电机转轴步进一个步距角增量。电机总的回转角与输入脉冲数成正比例,相应的转速取决于输入脉冲频率。 步进电机是机电一体化产品中关键部件之一,通常被用作定位控制和定速控制。步进电机惯量低、定位精度高、无累积误差、控制简单等特点。广泛应用于机电一体化产品中,如:数控机床、包装机械、计算机外围设备、复印机、传真机等。 Abstract This article mainly elaborated has been hanging the movement control system merit, introduced was hanging the movement control system function, the principle and the design process. Is hanging the movement control system is one of in control engineering domain important applications, its main target is to is controlled the object the movement condition, including path, speed and position implementation check. The movement control system compares with other control systems, has the system model simply, the check algorithm is unitary, also not complex characteristic and so on non-linearity and coupling situation. Also is precisely because the movement control system can implement to the path, the running rate, the pointing accuracy as well as the repetition precision accuracy control requirement, has the broad application foreground in each category of control engineering, therefore the movement control system has at present become in the check study application domain very much significant the research direction. Through the monolithic integrated circuit to stepping monitor check, implemented the motor-driven to cause the object at on the board which inclined the movement, The control section is the SST89E52 monolithic microcomputer which SST Corporation produces primarily, with when the 1602LCD liquid crystal screen and according to turned has implemented with the user interactive, through the keyboard entry different control command, the liquid-crystal display was allowed to display the setting value and the run the coordinates. The electrical machinery control section used LM324N four to transport puts and is connected the electronic primary device voluntarily to develop the 42BYG205 stepping monitor actuation electric circuit to implement the electrical machinery accuracy control. The algorithm partially for will suit the monolithic integrated circuit system to operate carries on optimizes many times, will reduce the microprocessor the operand. Has completed the object voluntarily the movement and according to the different setup path movement. Key words Magneto; 1602LCD; LM324N; Drive circuit 选择步进电机时,首先要保证步进电机的输出功率大于负载所需的功率。而在选用功率步进电机时,首先要计算机械系统的负载转矩,电机的矩频特性能满足机械负载并有一定的余量保证其运行可靠。在实际工作过程中,各种频率下的负载力矩必须在矩频特性曲线的范围内。一般地说最大静力矩Mjmax大的电机,负载力矩大[1 ]。 选择步进电机时,应使步距角和机械系统匹配,这样可以得到机床所需的脉冲当量。在机械传动过程中为了使得有更小的脉冲当量,一是可以改变丝杆的导程,二是可以通过步进电机的细分驱动来完成。但细分只能改变其分辨率,不改变其精度。精度是由电机的固有特性所决定。 选择功率步进电机时,应当估算机械负载的负载惯量和机床要求的启动频率,使之与步进电机的惯性频率特性相匹配还有一定的余量,使之最高速连续工作频率能满足机床快速移动的需要。 基于单片机的悬挂运动控制系统,具有硬件电路结构简单,精确度高,抗干扰性强等优点。 课题目的 培养综合运用四年大学所学知识去分析问题和解决实际问题的能力。在实践中检验所学知识,从而加强理论与实践的相结合。 体验一个科研项目开发的全过程,学会单片机开发应用方法,锻炼应用能力,动手能力。本课题设计是具有一定难度的基于单片机的应用系统开发项目,培养学生创新精神和创新能力。通过这次毕业论文及设计,检验的综合素质和专业教育的培养效果,并且使学会阅读、利用英文文献资料,阅读并翻译外文资料的能力,学会设计报告和论文。 课题意义 随着社会的发展、科技的进步以及人们生活水平的逐步提高,各种方便于生活的自动控制系统开始进入了人们的生活,以单片机为核心的自动门系统就是其中之一。同时也标志了自动控制领域成为了数字化时代的一员[ 3]。它实用性强,功能齐全,技术先进,使人们相信这是科技进步的成果。它更让人类懂得,数字时代的发展将改变人类的生活,将加快科学技术的发展。 通过对“微机控制自动门系统”的研究和设计,精心撰写了微机控制自动门系统论文。本论文着重阐述了以单片机为主体,LED点阵显示芯片及步进电机为核心的系统。 本设计主要应用SST89E58作为控制核心,LED点阵显示芯片、步进电机、压力传感器、电位器相结合的系统。充分发挥了单片机的性能。其优点硬件电路简单,软件功能完善,控制系统可靠,性价比较高等特点,具有一定的使用和参考价值。 应解决的主要问题 在基于单片机的悬挂运动控制系统中,主要分三个部分设计,一个是输入和键盘显示模块;另一个是步进电机驱动模块;第三个是最小系统和输出模块设计。主要解决的问题是: 1. 单片机最小系统硬件设计; 2. 步进电机驱动模块设计; 3. 输出部分的软硬件设计; 4. 主程序设计; 5. 绘图板的设计。 技术要求 设计一电机控制系统,控制物体在倾斜(仰角≤100度)的板上运动。 在一白色底板上固定两个滑轮,两只电机(固定在板上)通过穿过滑轮的吊绳控制一物体在板上运动,运动范围为80cm×100cm。物体的形状不限,质量大于100克。物体上固定有浅色画笔,以便运动时能在板上画出运动轨迹。板上标有间距为1cm的浅色坐标线(不同于画笔颜色),左下角为直角坐标原点。[看不到}

329 评论

麻球小子

(一)摘要摘要是毕业设计(论文)主要信息的简要陈述,具有独立性和完整性。摘要内容包括本论文研究目的、方法、结果、结论四部分。千万不要讲一些人们已经做过的工作。要开门见山地讲本文的主要工作。摘要分中文摘要和外文摘要,中文摘要在前,一般300字左右,外文摘要另起一页,内容应与中文摘要对应。(二)正文毕业论文正文部分包括前言、主体和结论。前言作为开场白,应以简短的篇幅,说明毕业论文选题的目的和意义、国内外文献综述、研究的内容及预期目标,要求突出重点,实事求是。主体是毕业论文的核心部分,占主要篇幅。毕业论文正文字数一般要求在15000字以上。有创新的论文,字数不受限制。文中插入的图表要符合国家标准,经过精心设计后用计算机绘制,尽量避免扫描图表。结论是整个毕业论文的最后总结,完整、准确、简洁地指出以下内容:(1)毕业论文得到的结果所揭示的原理及其普遍规律;(2)研究中有无发现例外或本文尚难以解释和解决的问题;(3)与同类研究工作的异同;(4)进一步深入研究本课题的建议。(三)参考文献毕业设计(论文)要求有10篇以上的中外文参考文献,其中至少有一篇与设计(论文)内容相关的外文文献。毕业设计(论文)引用的文献应以近期发表的与毕业设计(论文)直接有关的文献为主。凡引用本人或他人已公开或未公开发表文献中的学术思想、观点或研究方法、设计方案等,不论借鉴、评论、综述,还是用做立论依据,都应编入参考文献目录。各条文献按在论文中的文献引用序号顺序排列。

199 评论

相关问答

  • 步进电机毕业论文参考英文文献

    文献1:This project aimed to develop a wireless system to detect and allow only the

    我来打包带走 3人参与回答 2023-12-07
  • 关于步进电机论文范文参考

    我国是以煤为主要一次能源的国家,而50%以上煤炭消耗于火力发电,传统火力发电面临发电效率低、环境污染大等缺点,亟待改善。整体煤气化联合循环技术(Integrat

    twinkle100 4人参与回答 2023-12-05
  • 步进电机驱动器毕业论文

    步进电机相关毕业设计 ·基于FPGA的步进电机控制系统的数字硬件设计研究·基于单片机步进电机控制系统设计·单片机控制步进电机毕业设计论文·单片机控制步进电机 毕

    花香盈路 3人参与回答 2023-12-05
  • 同步电动机毕业论文

    基于神经网络逆系统的磁悬浮开关磁阻电动机的解耦控制 隐极同步电动机转矩可控性与解偶性分析 基于BUCK变换器的无刷直流电机转矩脉动抑制方法 基于NIOS软核处理

    小冷0623 4人参与回答 2023-12-07
  • 步进电动机控制器的研究论文

    步进电机作为执行元件, 是机电一体化的关键产品之一,广泛应用在各种自动化控制系统中。我为大家整理的电机控制技术论文,希望你们喜欢。 电机控制技术论文

    如果蛋蛋愿意 3人参与回答 2023-12-07