紫雨洋依
人工翻译，不信你去百度，绝对不是这么翻译滴，看你100分我才出手的In recent years, the rapid growth of motor vehicles in Shenzhen, traffic congestion, traffic pollution is becoming more and more serious. As of December 20, 2014, Shenzhen vehicle fleet of more than3140000 units, nearly 5 years the average annual growth rate of about 16%, per kilometre of roadvehicles about 500 vehicles, the density of the country's first. Among them, in 2013, about 370000 new units, the growth rate reached 16.5%; in 2014 added about 550000 vehicles, the growth rate of20.9%. Along with the sustained and rapid growth of motor vehicles, traffic congestion timeincreasing, the traffic congestion areas continue to expand. In December last year, the original SARexpressway, trunk road average flow rate of 165000 a day, morning and evening peak flow of 19200 vehicles per day of 4 hours, accounting for 11.66% of daily flow. Since the outer limit orderissued, the original SAR of 186000 a day, morning and evening peak flow of 24000 vehicles per day, accounting for 12.90% the proportion of commuter traffic flow, the peak of the rush hour traffichas increased, increased efficiency, in this context, the 2015 provisions of the limit line to ShenzhenShenzhen car restriction rules promulgated. According to the Shenzhen municipal foreign car limit line, the field plate shall be in accordance with the provisions of the car route during the morning and evening peak and area of travel. The Shenzhen foreign cars limit line for the latest news,February 1st, the morning rush to work (7:00~9:00), (17:30~19:30) during the evening peak, all the way in Shenzhen, Luohu District, Futian District, Yantian District, Nanshan District 4 administrativeregion, small, mini passenger cars in Shenzhen issued a motor vehicle license plate shall be run according to the the provisions of the route and area. 2015 Shenzhen restrictions on Shenzhen foreign cars limit line sections and the time limit prescribed above, large and medium-sized passenger car is not restricted, the truck into the Shenzhen city roads should apply for permits in accordance with the provisions of. The notice of violation of the provisions of the vehicle driversfined 300 yuan, a penalty of 3 points. 2015 Shenzhen limit line since February 1st, systemmonitoring to deep plate of passenger cars in Shenzhen limit line road, time limit line driving record,the first second times, not punishment, since third time the punishment according to law. Shenzhenimported vehicle limit line for the latest news, please pay attention to the Shenzhen traffic police bureau. The vehicle is the most important security, suggested by Zhongmin insurance network forquality insurance and accident insurance products.
善美梅子
有以下修改方法：
一、尽量用同义词替代，比如：损坏=破坏；渠道=途径；原理=基本思路；不可见=隐藏；优点尤其突出=优势尽显无疑。
二、改变句子的主动被动语态，比如：数字水印为多媒体数据文件在认证、防伪、防篡改、保障数据安全和完整性等方面提供了有效的技术手段。
三、可以将文字转换为表格、表格基本是查重不了的，文字变成图形、表格变成图形，一目了然，绝对不会检查出是重复剽窃了。
四、故意在一些缩写的英文边上，加上（注释）(画蛇添足法），总之，将每句话都可以变化一下。
知网系统计算标准详细说明：
1．这套系统对于文字复制鉴别还是不错的，但对于其他方面的内容呢，比如数据，图表则不是很清晰。学术不端的各种行为中，文字复制是最为普遍和严重的。
目前本检测系统对文字复制的检测已经达到相当高的水平，对于图表、公式、数据的抄袭和篡改等行为的检测，目前正在研发当中，且取得了比较大的进展，欢迎各位继续关注本检测系统的进展并多提批评性及建设性意见和建议。
2．按照这个系统39%以下的都是显示黄色,那么是否意味着在可容忍的限度内呢?最近看到对上海大学某教师的国家社科基金课题被撤消的消息,原因是其发表的两篇论文有抄袭行为,分别占到25%和30%. 请明示超过多少算是警戒线。
百分比只是描述检测文献中重合文字所占的比例大小程度，并不是指该文献的抄袭严重程度。只能这么说，百分比越大，重合字数越多，存在抄袭的可能性越大。是否属于抄袭及抄袭的严重程度需由专家审查后决定。
3．如何防止学位论文学术不端行为检测系统成为个人报复的平台？
这也是我们在认真考虑的事情，目前这套检测系统还只是在机构一级用户使用。我们制定了一套严格的管理流程。同时，在技术上，我们也采取了多种手段来最大可能的防止恶意行为，包括一系列严格的身份认证，日志记录等。
哆啦Y梦
Summarymy country's manufacturing industry is the main force in my country's exports. A large number of exports and relatively low imports have created my country's trade surplus. In the past, my country's manufacturing industry had low raw material costs, sufficient human resources, and low labor costs, which attracted a large amount of capital to invest in the country; it played a major role in economic growth. With the rapid development of my country's economy; inflation, RMB appreciation, and rising prices and land costs have caused the cost of my country's manufacturing industry to rise rapidly, and the low-cost advantage of my country's manufacturing industry has gradually weakened.In contrast, the relatively poorly developed countries in Southeast Asia have increased their attraction to foreign investment and accelerated the development of their manufacturing industries with their low costs; they are following China's "old path." On the other hand, after the 2008 financial crisis, developed countries recognized the importance of the real economy for maintaining the stability of the developed countries' economies and introduced a "reindustrialization" strategy; especially in the high-end manufacturing sector, a large number of industries returned.However, because my country's manufacturing industry has long been at the bottom of the value chain of the international division of labor; it is mainly based on basic industries such as processing and reprocessing, and its investment in high-end intelligent manufacturing is minimal. Therefore, our country is facing a situation where low-end industries are gradually being eroded by Southeast Asian countries, and high-end industries cannot compete with developed countries.This article studies the current situation of my country's manufacturing industry and points out the difficulties encountered by my country's manufacturing industry and its deep-seated reasons; combined with the industrialization development experience of developed countries and my country's actual national conditions, the development trend of my country's manufacturing industry is demonstrated.The first chapter is the introduction. Introduce the topic background and significance, research object and purpose, research methods and ideas, and literature review of this article to study the development trend of manufacturing industry.The second chapter focuses on analyzing the current situation of my country's manufacturing industry. Starting from the international competitiveness of my country's manufacturing industry, it analyzes the current difficulties encountered by my country's manufacturing industry, and analyzes the overall level of my country's manufacturing industry in the development process in combination with the world's division of labor value chain.The third chapter discusses the experience of industrial development in developed countries, especially the development experience of German Industry 4.0, to demonstrate the development of my country's manufacturing industry.The fourth chapter is a summary of the full text, summarizing the development direction and precautions of my country's manufacturing industry.Keywords: manufacturing, transformation, division of labor, value chain, development trend
Paperbye论文查重系统标准版每天免费查重不限篇数和字数，自带改重的论文查重系统，解决了目前市场论文查重之后，不知道怎么修改和修改论文效率低的问题，利用软件
xiaoze2000 8人参与回答 2023-12-09 论文查重是对判断能力的标准之一的论文重复率的检测，需要对论文进行查重，防止学术不端。那么查卷时应该注意哪些事项呢？使用学术不端论文查重免费网站，大学生版（专/本
Nuannuan暖 7人参与回答 2023-12-08 硕士论文查重要求如下： 1、硕士论文字数：硕士论文字数一般在3W以上，严谨论文一般在7W以上。 2、重复率要求：一般硕士论文查重率要在15％以内，才能达到合格标
哇小妹夫 3人参与回答 2023-12-10 中国知网自己查重的方法如下： 电脑：华为MateBook。 系统：Windows10。 软件：谷歌浏览器。 1、打开电脑的浏览器，百度搜索“中国知网论文查重检测
wxb2066472463 5人参与回答 2023-12-07 1 取决于具体情况，无法一概而论。2 查重率偏高可能是因为论文中存在大量引用或者与其他论文的重合度较高，也可能是因为文献库的覆盖率较高，导致重复率偏高。3 查重
neil2446326902 5人参与回答 2023-12-09 
