力学毕业论文翻译

Hot Deformation Behavior of metal an important aspect of research is to study the metal in the process of hot deformation behavior of the flow stress, as well as changes in the law of the mechanical properties of the macro-response behavior is the flow stress. According to the theory of deformation, the flow stress of metal materials in a one-way refers to the deformation conditions sufficient to achieve plastic deformation of the stress intensity. Metals and alloys in the plastic working process, the flow stress determined the deformation of the size of equipment needed to load and the size of the required energy consumption. Generally speaking, the impact of the metal flow stress factors in general can be divided into internal factors and external factors. The main external factors, including deformation temperature, strain rate and strain (deformation), they are internal factors of the flow stress of metallic materials. Deformation temperature on the impact of flow stress as follows: flow stress with deformation temperature lower, but reduced somewhat different, that is, the higher strain rate, with the increase in deformation temperature, flow stress gradient reduced more Great. Strain rate on the impact of flow stress: the higher the strain rate, the greater the value of flow stress, and increase the flow stress with temperature changes, temperature, the higher the lower the rate of increase. The rate of increase of flow stress is not maintained at a fixed value, but as the strain rate changes. Internal factors include the chemical composition of metals, metal the microstructure changes such as dynamic recovery and dynamic recrystallization, such as work hardening. High-temperature mechanical deformation of metallic materials from high temperature creep behavior of metals on the basis of developed. Metals and alloys the existence of thermal processing thermal activation process, the strain rate thermal activation process control. Deformation under different conditions using different expressions, but also related to thermal activation, the dislocation movement, such as the micro-mechanism. This paper AZ31 magnesium alloy sheet for the study, the RG-based microcomputer-controlled universal testing machine, metallographic microscope and scanning electron microscopy tools, research and analysis of magnesium alloy at different temperatures forming performance, flow stress and microstructure changes in the law. The following conclusions: 1. Extrusion, cross-rolling, cold-rolled, hot-rolled, as well as the level of casting AZ31 magnesium alloy sheet metal microstructure is equiaxed structure, the grain size of 5 ~ 25μm; 2. Extrusion of magnesium alloy sheet metal grain size is about 5 ~ μm, the strain rate is less than , the deformation temperature is higher than 150 ℃, the extension rate of greater than 45%, and with the strain rate lower or raise the temperature of the peak flow stress also be reduced accordingly. When the temperature is 425 ℃, then the peak steady-state flow stress is almost equal to the flow stress at the time that the peak stress does not appear, and its value in between 18 ~ 20MPa, and the extension rate of 132%. 3. Cross-rolled sheet metal so that the peak flow stress decreased significantly increased plasticity. (And can reduce or eliminate the anisotropic material to improve the performance of its punch, so that elongation of the material significantly increased for deep-drawing deformation even provided a good internal organization.) At a temperature of 425 ℃, strain rate is less than , the elongation δ> 225%, alloy shows superplasticity. 4. 250 ~ 425 ℃ temperature range, semi-continuous casting + annealing cold-rolled sheet before and after the stress - strain curve changes little elongation δ are greater than 65%. Cold-rolled sheet can be used directly in temperatures greater than 250 ℃ forming thermal processing. 5. At a high temperature to soften and as a result of the role of dynamic recrystallization results of horizontal continuous casting + anisotropic cold-rolled sheet has been significantly improved. At 250 ℃ when the sheet are an extension of the rate of 118 percent, the smallest anisotropy alloys. 6. At a temperature less than 220 ℃, the fracture morphology of the main axis for large and small dimples, such as composition, surface tear edge clarity, and depth of dimples smaller size; When the temperature is greater than 240 ℃ when the equiaxed the edge of dimples appear fine grains, the occurrence of a fracture. Magnesium alloy at high temperature phase of the basic fracture along fracture, with the strain rate increased, the fracture mode transformed to the ductile fracture trend. AZ31 magnesium alloy in the plastic deformation occurred during the dynamic recrystallization and grain growth.

毕业论文用英语的翻译：毕业 论文 迅捷在线翻译：Graduation （毕业） thesis（论文）参考一下

Thesis For Graduation毕业论文Thesis For Academic Degree学位论文Thesis表示比较严肃的文章，是带有一定目的的，研究性的文章。学位论文，研究报告。

“毕业论文”的英文：Graduation Dissertation

Dissertation 读法 英 [,dɪsə'teɪʃ(ə)n]  美 ['dɪsɚ'teʃən]

n. 论文，专题；学术演讲

短语：

1、academic dissertation 学位论文 ; 学术论文

2、Graduation Dissertation 毕业论文

3、Doctorate dissertation 博士论文

4、Dissertation Committee 论文委员会

5、dissertation topics 毕业论文题目

词义辨析：

article, paper,dissertation, essay, prose, thesis这组词都有“文章”的意思，其区别是：

1、article 多指在报刊、杂志上发表的非文艺性的文章，包括新闻报导、学术论文等。

2、paper 正式用词，多指在学术刊物上发表或在学术会议上宣读的专题论文，也指高等学校的学期论文，或学校里的作文练习。

3、dissertation 书面语用词，指独立研究后所写的较为详细的专题文章；也可指学位论文。

4、essay 指任何一种非小说性的，篇幅不长、结构简练的文章，如论说文、报道、评论、讽刺性杂文等。

5、prose 专指散文。

6、thesis 既可指毕业论文、学位论文，又可指一般的为阐述学术观点而写的论文。

例句：

1、Exploring "Trinity Working Mode" of Integrating Graduation Field Work, Graduation Dissertation and Employment on Graduation.

毕业实习、毕业论文与学生就业三位一体工作模式探索。

2、On Problems in Writing Graduation Dissertation

关于撰写毕业论文应该注意的问题。

毕业论文是Graduation thesis 若要在论文里指论文就可以直接说thesis或者paper

A Thesis Submitted as a Partial Fulfillment of the Requirement for the Degree of B. A./B. S. in ***这是标准的学士学位毕业论文的说法，.代表文学学士，.代表理学学士，***处填上专业。