容嬷嬷201
AbstractWith the industry of rubber and plastic prospering, there is wider and wider application of rubber and plastic products. Besides, the requirements for such products are higher and higher and the standards for totally enclosed mixing mill has become more and more strict. This treatise makes systematic designs and analysis of the major reductor, rotor, structure, cooling methods and turbine reverser of the totally enclosed mixing mill on the basis of referring to a mass of both domestic and foreign literature concerning the principle of mixing refining and related experiments. The treatise accomplishes the 3-D modeling and assembling of the totoal enclosed mixing mill using UG, makes finite element analysis of rotors of key parts, makes optimizational design of parameters of velocity ratio gears before and after the mixing with the MATLAB software, writes optimizational programs using the MATLAB language, calculates, analyse and seek the best result with MATLAB optimizational tool box, analyse the optimizational result from a realistic angle and at last, makes emulational analysis of the total enclosed mixing mill and get the emulation result to test and verify the words: total enclosed mixing mill, 3-D modeling, finite element analysis, optimizational design, emulational analysis校过一遍，仅供参考，希望有用。
刀剑如梦1
毕业论文外文翻译：将外文参考文献翻译成中文版本。
翻译要求：
1、选定外文文献后先给指导老师看，得到老师的确认通过后方可翻译。
2、选择外文翻译时一定选择外国作者写的文章，可从学校中知网或者外文数据库下载。
3、外文翻译字数要求3000字以上，从外文文章起始处开始翻译，不允许从文章中间部分开始翻译，翻译必须结束于文章的一个大段落。
参考文献是在学术研究过程中，对某一著作或论文的整体的参考或借鉴。征引过的文献在注释中已注明,不再出现于文后参考文献中。外文参考文献就是指论文是引用的文献原文是国外的，并非中国的。
原文就是指原作品,原件，即作者所写作品所用的语言。如莎士比亚的《罗密欧与朱丽叶》原文是英语。
译文就是翻译过来的文字，如在中国也可以找到莎士比亚《罗密欧与朱丽叶》的中文版本，这个中文版本就称为译文。
主要标准
翻译是语际交流过程中沟通不同语言的桥梁。一般来说，翻译的标准主要有两条：忠实和通顺。
忠实
是指忠实于原文所要传递的信息，也就是说，把原文的信息完整并且准确地表达出来，使译文读者得到的信息与原文读者得到的信息大致相同。
通顺
是指译文规范、明白易懂，没有文理不通、结构混乱、逻辑不清的现象。
实践产生理论，欧美许多国家的翻译理论是五花八门的。从大的方面来看，可以分为两大派：一派是翻译可能论，一派是翻译不可能论。其实，完完全全百分之百的可能是没有的，完完全全百分之百的不可能也是没有的。
世界上一切翻译活动都是在这两个极端之间进行的。欧洲许多著名的人物，比如马丁·路德、M.阿诺德、.纽曼、.波斯特加特、H.白洛克、.诺克斯、V.那巴可夫等等，都对翻译提出了自己的理论。据《开塞尔世界文学百科全书》的意见，这些理论中有些是刚愎自用的。
请叫我阿虎
Input required here Translate this graduation project is the most important part of software Pro / E applications and processing of road provision and implementation process knife. Dissertation focused on the parts of which modeling and NC machining process analysis, as well as Pro / ENGINEER Analog processing parts of this thesis to the three-dimensional modeling analysis of CNC machining parts, and then to Pro / E in CNC Machining, have to do a detailed analysis and description. Chapter are the foreword, which we can understand that the PRO / E production in the social development of the industry and its importance. Chapter II is based on the PRO / E parts modeling design, highlighted in the processing of this thesis the process of product modeling software the detailed process descriptions and many images that give readers a clear understanding of PRO / E product design function and related CNC machining. Key words: modeling; CNC machining technology; Analog processing languageChapter III is the analysis of NC machining process content, in this chapter can be seen that in the production process of how the preparation of CNC machining processes, as well as CNC machining process designed to be basic requirements. Chapter IV are parts in PRO / E software environment for NC machining simulation analysis, as well as the generation of NC instructions. Designed from the present reality, the system introduced on PRO / E of basic applications, the application of functional commands, CNC Machining in PRO / E software in the simulation analysis, and generate CNC machining instructions.
Elena小妞仔
文献指的是写论文时你所参考的文章，一般有20到30个文献。我读英语专业，所以都是英文的。有同学让我帮忙翻译过摘要，也就是摘要是中英文的，你的文献翻译应该是将文献写成英文的。
艳的笑窝
This graduation project most main part is in the software Pro/E application and the processing arranges the knife road and realizes the processing. In the middle of the paper emphasizes the components modelling and the numerical control processing craft analysis, as well as Pro/ENGINEER simulation processing analysis. the present paper from the components three dimensional modelling to the components numerical control processing analysis, then arrives at Pro/E first in the numerical control processing application, has made the detailed analysis and the narration. The first chapter is the foreword, may understand PRO/E through its us in the social product profession development condition and the importance. The second chapter is based on the PRO/E components modelling design, emphasizes in product modelling process which in the present paper processes software's application. The third chapter is the numerical control processing process study aspect content, in this chapter may understand how to establish the numerical control processing craft in the production process, as well as numerical control processing technological design essential requirements and so on. The fourth chapter is the components under the PRO/E software environment the numerical control processing simulation analysis, as well as numerical control instruction production. this design embarks from the reality, introduced systematically based on the PRO/E foundation application, the function command application, the numerical control processing in the PRO/E software's simulation analysis as well as the numerical control processing instruction production. Through the detailed procedure declaration and the massive caption, let the reader understand PRO/E clearly clearly the product design function and the related numerical control processing. key word: Modelling; Numerical control processing craft; Simulation processing
A Thesis Submitted as a Partial Fulfillment of the Requirement for the Degree of
生活算个球 6人参与回答 2023-12-05 智能三维虚拟试衣模特仿真系统设计* 摘要:针对服装物理仿真通常计算量庞大、在低端硬件平台或交互式环境进行高质量模拟的挑战,将人工生 命思想引入服装纹理生成,基于
xuexue1535 3人参与回答 2023-12-07 一、3dmax优势： 1、3dmax的工作方向主要是面向建筑动画，建筑漫游及室内设计。用于室内外效果图制作方面的基本建模、材质赋予、贴图使用和灯光创建的图形文件
吃了个肚歪 9人参与回答 2023-12-10 论文翻译成英文一般找公司来做就可以了，省时省力，我毕业论文就是找清北医学翻译这个公司翻译的。
浮云秋叶 6人参与回答 2023-12-08 基于3D MAX的建模方法〔 作者：Admin 来源：博景源 点击数：1 更新时间：2007-3-17 〕摘 要计算机动画在教学领域的应用是这几年开始的，主要用
家D玫瑰 3人参与回答 2023-12-05 
